- 您现在的位置：买卖IC网 > Sheet目录475 > MAX9635ESA+ (Maxim Integrated)IC AMBIENT LIGHT SENSOR 8NSOIC
Industry’s Lowest-Power
Ambient Light Sensor with ADC
Integration Timer Bits (TIM[2:0])
The TIM[2:0] bits can be used to program the signal integration time.
In automatic mode (MANUAL = 0), integration time is automatically selected by the on-chip algorithm to be either
100ms/200ms/400ms/800ms. In manual mode (MANUAL = 1), integration time can be varied by the user all the way
from 6.25ms to 800ms. See Table 7.
Table 7. Integration Time
TIM[2:0]
000
001
010
011
100
101
110
111
INTEGRATION
TIME (ms)
800
400
200
100
50
25
12.5
6.25
COMMENTS
This is a preferred mode for boosting low-light sensitivity.
—
—
This is a preferred mode for high-brightness applications.
Manual mode only.
Manual mode only.
Manual mode only.
Manual mode only.
Lux High-Byte Register 0x03
BIT 7
E3
BIT 6
E2
BIT 5
E1
BIT 4
E0
BIT 3
M7
BIT 2
M6
BIT 1
M5
BIT 0
M4
REGISTER
ADDRESS
0x03
Bits in Lux High-Byte register 0x03 give the 4 bits of exponent E3:E0 and 4 most significant bits of the mantissa byte
M7:M4, and represent the lux reading of ambient light. The remaining 4 bits of the mantissa byte M3:M0 are in the Lux
Low-Byte register 0x04 and enhance resolution of the lux reading from the IC.
Exponent (E[3:0]): Exponent bits of the lux reading (0000 to 1110). Note: A reading of 1111 represents an overrange
condition.
Mantissa (M[7:4]): Four most significant bits of mantissa byte of the lux reading (0000 to 1111).
Lux = 2 (exponent) x mantissa x 0.72
Exponent = 8xE3 + 4xE2 + 2xE1 + E0
Mantissa = 8xM7 + 4xM6 + 2xM5 + M4
A code of 0000 0001 calculates to be 0.72 lux.
A code of 1110 1111 calculates to be 176,947 lux.
A code of 1110 1110 calculates to be 165,151 lux.
Update of the contents of this register is internally disabled during I 2 C read operations to ensure proper data transfer
between internal ADC and I 2 C registers. Update of I 2 C registers is resumed when the master sends a STOP command.
If user wants to read both the Lux High-Byte register 0x03 and Lux Low-Byte register 0x04, then the master should
not send a STOP command between the reads of the two registers. Instead a REPEATED START command should
be used. This ensures accurate data is obtained from the I 2 C registers (by disabling internal updates during the read
process).
9
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
MAX9930EVKIT+
KIT EVAL FOR MAX9930
MAX9947ETE+
TXRX AISG INTEGRATED 16TQFN
MAX9981ETX+D
IC MIXER DUAL SIGE 36-QFN
MAX9981EVKIT
EVAL KIT FOR MAX9981
MAX9982ETP+D
IC MIXER HI LINEAR SIGE 20-TQFN
MAX9982EVKIT
EVAL KIT FOR MAX9982
MAX9984ETP+T
IC MIXER DOWN CONV 20-TQFN
MAX9985ETX+T
IC MIXER DOWN CONV DUAL 36-TQFN
相关代理商/技术参数
MAX9635ESA+T
功能描述:环境光传感器 Ambient Light Sensor
RoHS:否 制造商:Vishay Semiconductors 工作电源电压: 峰值波长:570 nm 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:T-1 封装:Bulk
MAX9635EVKIT
功能描述:光学传感器开发工具 MAX9635 Eval Kit RoHS:否 制造商:ams 工具用于评估: 接口类型: 最大工作温度:
MAX9635EVKIT#
功能描述:环境光传感器 Industry’s Lowest-Power Ambient Light Sensor with ADC RoHS:否 制造商:Vishay Semiconductors 工作电源电压: 峰值波长:570 nm 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:T-1 封装:Bulk
MAX9635EVKIT+
功能描述:光学传感器开发工具 MAX9635 Eval Kit RoHS:否 制造商:ams 工具用于评估: 接口类型: 最大工作温度:
MAX9636AXT+
制造商:Maxim Integrated Products 功能描述: 制造商:Maxim Integrated Products 功能描述:3V/5V LOW-POWER LOW-NOISE RAIL-TO-RAIL I/O OP AMP (SINGLE CH - Rail/Tube
MAX9636AXT+T
功能描述:运算放大器 - 运放 3V-5V Low-Power Op Amp RoHS:否 制造商:STMicroelectronics 通道数量:4 共模抑制比（最小值）:63 dB 输入补偿电压:1 mV 输入偏流（最大值）:10 pA 工作电源电压:2.7 V to 5.5 V 安装风格:SMD/SMT 封装 / 箱体:QFN-16 转换速度:0.89 V/us 关闭:No 输出电流:55 mA 最大工作温度:+ 125 C 封装:Reel
MAX9636EVKIT+
功能描述:放大器 IC 开发工具 MAX9636 Eval Kit RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V
MAX9637AXA+
制造商:Maxim Integrated Products 功能描述:OPERATIONAL AMPLIFIER - Rail/Tube